Doors to Size :: Shelves Worktops

Doors to Size > Panel Types > Shelves Worktops

Shelves and Worktops

  • Shelves and Worktops are panels with one or more edges rounded.
  • They are suitable for bedside cabinets and bathroom shelves that are light duty.
  • Not suitable for mounting sinks on or kitchen worktops where there is heavy ware.
  • The profiles match the profiles of the door styles. or you can select from the plain style range.
  • Square edge, 3mm Pencil Round, Plain Rounded Edge 6mm, Plain Rounded Edge 10mm Stepped 10mm Rounded and Contemporary.
  • When two or more edges are profiled we round the corner with a 10mm radius, we do this to avoid having a sharp edge on the exposed corners.
 

shelf-10mm-front.jpg

Shelf-Worktop Profiled Front

  • The front edge has a profile to the top front of the panel the other three sides are square edged.
  • When ordering the width is left to right and the depth of the shelf should be entered in the height field.
  • Wood grains would go left to right.
 

holder-image.jpg

Shelf-Worktop Profile Front and Left

  • The front and left hand edge have a profile on the front and left hand side and a 10mm rounded corner on the left hand front.
  • This is an great solution for bedside cabinets that go against a wall and unit.
 

holder-image.jpg

Shelf-Worktop Profile Front and Right

  • The front and right hand edge have a profile on the front and left hand side and a 10mm rounded corner on the right hand front.
  • This is an great solution for bedside cabinets that go against a wall and unit.
  • Wood grains would go left to right.
 

holder-image.jpg

Shelf-Worktop Profile Front Left and Right

  • The front left and right hand edge have a profile on the front and left hand side and a 10mm rounded corner on the left and right hand corners.
  • This is an great solution for bedside cabinets that go against a wall.
  • Wood grains would go left to right.
 

holder-image.jpg

Shelf-Worktop Profile All Sides

  • The front and left hand edge have a profile on the front and left hand side and a 10mm rounded corner on the left hand front.
  • This is an great solution for light duty table tops.
  • Wood grains would go left to right.